# 밸브 주변 디스맨틀링 조인트 설치 가이드\n\n## B2B 구매자를 위한 가이드\n\n이 글은 해외 엔지니어링 구매자, 시공사, 유통업체 및 OEM/ODM 고객이 견적 요청 전에 필요한 기술 정보를 정리하도록 돕기 위해 작성되었습니다.\n\n## 배관 피팅: 밸브 주변 디스맨틀링 조인트 설치 가이드\n\n제품명만 보지 말고 배관 크기, 압력 등급, 연결 표준, 재질, 유체, 온도, 설치 위치, 수량 및 도면을 확인해야 합니다.\n\n관련 제품에는 고무 익스팬션 조인트, 디스맨틀링 조인트, 파이프 커플링, 플랜지 어댑터, 금속 벨로우즈 조인트 및 방수 슬리브가 포함됩니다.\n\n## RFQ\n\n빠르고 정확한 견적을 위해 DN 크기, 압력 등급, 플랜지 표준, 재질, 사용 유체, 온도, 수량, 도면 또는 사진을 보내 주세요.\n\n- DN / size\n- pressure rating\n- connection standard\n- material\n- working medium and temperature\n- quantity\n- drawing, photo or specification\n\n## Quality and Packing\n\n출하 전에는 외관, 치수, 연결면, 부속품, 라벨 및 포장 방식을 확인합니다. 시험 요구사항은 생산 전에 확인해야 합니다.\n\n## Project Inquiry\n\n프로젝트용 배관 피팅이 필요하면 크기, 압력, 연결 표준, 재질, 유체, 수량 및 도면을 보내 주세요.
常见问题
?Should a dismantling joint be installed upstream or downstream of a valve?
There is no universal position. The location should be selected according to the maintenance direction, piping layout, lifting access, flow arrangement, pipe anchors and approved project drawings. The joint must provide usable removal clearance, while the valve and pipeline remain independently supported.
?Can a dismantling joint correct lateral pipe misalignment?
No. A dismantling joint mainly provides controlled axial installation adjustment. It should not be used to force significantly misaligned, angled or non-parallel flanges into position.
?Are flange gaskets required when installing a dismantling joint?
Suitable flange gaskets are normally required between the valve, dismantling joint and pipeline flanges. Their material must match the medium, temperature, pressure and flange face. Confirm whether they are included in the ordered supply scope.
?Can a dismantling joint support valve or pipe weight?Can a dismantling joint support valve or pipe weight?
No. Valves, pipes and the joint must be properly supported by foundations, supports, hangers or lifting equipment. The dismantling joint should not be used as a load-bearing component.
?What is the difference between flange bolts, gland bolts and tie rods?
Flange bolts connect the valve, joint and pipe flanges. Gland bolts compress the sealing ring around the telescopic section. Tie rods restrain the assembly and transmit approved axial forces. They have different functions and must be adjusted according to the product drawing.Flange bolts connect the valve, joint and pipe flanges. Gland bolts compress the sealing ring around the telescopic section. Tie rods restrain the assembly and transmit approved axial forces. They have different functions and must be adjusted according to the product drawing.
?What must be done before using the joint to remove a valve?
Shut down and isolate the pipeline, fully depressurize and drain it, support the valve and adjacent pipe independently, and then release and collapse the joint according to the approved installation instructions. Never adjust or dismantle the joint under pressure.